Tag Archives: hydraulic equipment

New or Old, Hydraulic Oil Needs Filtration and Purification

To avoid replacement of contaminated oil that can still be used, it can, and should be be filtered and restored.  Obviously, the objective is to minimize costs while maximizing the result.

For this purpose, GlobeCore offers on site filtration solutions.  The filtration fineness of our UVR plant is 3 microns.

To evaluate just how efficient the 3 micron standard is, let’s take a look at proportional hydraulic systems.  The maximum allowable particle size is 5 microns.  If you were to measure the purity of new replacement oil for this equipment, you will see particles as high as 20 microns in the fluid.  Purification therefore, is not an option, it is mandatory before putting new oil into proportional hydraulic machine systems.

The precise price of oil purification through filtration may be determined directly on site.  The process will be influenced by many factors and the most important ones are (1) the volume or amount of processed oil, and (2) the degree of fluid contamination.

Each equipment manufacturer produces operator’s manuals for hydraulic fluid replacement, but that doesn’t mean that such manuals are always read and followed.  The main principles of a fluid replacement operation are as follows:

Oil should have been be stored in sealed vessels.  Before placing the oil into the hydraulic system, the hydraulic tank should be cleaned and should be absolutely free from all dirt and contamination accumulated during previous operations.

Oil must be filled only from clean canisters by special pumps.  These pumps prevent contaminants from entering the hydraulic system from the surface of the container.  At no time should new fluid be exposed to outside air and poured into the fluid tank.  The new fluid should be pumped though hoses from the top of the container into the fluid tank.  This will prevent any moisture found at the bottom of the container from being placed into the fluid tank.

If the fluid does have contact with air, its maximum storage life is approximately two years.  If a malfunction of the system requires that the fluid be drained, it’s properties should be examined before being returned to the hydraulic equipment fluid reservoir.

This is a relatively inexpensive process, especially in the case of heavy machinery with large volumes of the fluid.

Industry statistics reveal that as much as 70% of all hydraulic failures are caused by contamination of the system’s fluids.  Every professional mechanic learns a a very simple rule: “The purity of hydraulic oil is the basic foundation of reliable operation and long service life of hydraulic systems.” It is however, not the only factor.  Additionally, the careful selection of hydraulic fluid and use of the correct replacement procedures are just as important.

If you wish to protect your hydraulic equipment and extend the service life of the fluid in your circulating hydraulic systems, GlobeCore has your answer.  GlobeCore offers the best and most cost effective alternative to solving your preventive maintenance problems.  GlobeCore is the industry leader and provides you with all the best possible solutions to hydraulic fluid purification.

GlobeCore has several various models designed for purification and regeneration of turbine oil, industrial oil, and transformer oil.  The GlobeCore product and equipment range can tackle any purification problem in the industry today including Offshore and Marine applications.

Oil suppliers rarely provide oil of the purity required for modern hydraulic and lubrication systems. Hence the need for the consumers to take matters in their own hands and bring supplied oils up to spec.  GlobeCore will do this for you because you have enough to worry about.

It’s time to get with the Process, The GlobeCore Process!

Hydraulic System Operating Oil – What should we do next?

The cooling and purification of industrial hydraulic oil is a basic requirement in extending the service life of any hydraulic system.  Efficient cooling and purification solutions increase the reliability and service life of hydraulic equipment systems.  Efficient operation, along with timely prevent maintenance, will increase your long term profits.  To protect your equipment and the components of your hydraulic systems, the GlobeCore company, which operates in more than 70 countries in the field of oil purification equipment, offers a wide range of systems for reclamation and regeneration of any oil type.  This includes transformer insulating oil, hydraulic oils, transmission oils, turbine oils, and industrial oils of all types.

Used oils do not need to be used only as relatively cheap heat or energy sources any longer.  At present, it is possible to restore the used oil to its full market value.  GlobeCore has developed the GlobeCore Process for degassing, drying, and the purification of oils and hydraulic fluids.  Today, GlobeCore regeneration systems will allow your company to profit from used oils instead of having to pay for oil replacement and for the cost of disposing of used oil.

The Problem

Disposal of waste oil is becoming less and less common.  According to the latest expert conclusions, a large amount of waste oil products are constantly being generated in many industrial applications.  This rise in industrial waste oil has led to increases in handling and disposal costs and fines for violations of environmental regulations.

The Solution

GlobeCore offers an excellent solution to the problem.  The GlobeCore Process is now available for the complete restoration of used oil used in commercial applications.  The customer will no longer have to  pay for oil disposal, oil handling and for environmental licenses.  Instead, the customer can now reuse the what used to be a waste product.  A unique oil purification and regeneration process is used in a wide range of GlobeCore products.  The GlobeCore Process is environmentally sound because it does not cause the emission of unwanted gases, liquids and solid materials into the environment.  The use of the GlobeCore Process  facilitates up to a 95% conversion rate and that equates to a tremendous saving for your company in time, labor, oil and money.

GlobeCore has a line of equipment intended for the purification and regeneration of used industrial oil by removing solid particles, water, and other contaminates.  The process produces oil color improvement due to the removal of oil aging products, unwanted additives and finely dispersed asphaltenes.  The GlobeCore machines are quite simple and easy to operate.  They do not require complex adjustments and enjoy the competitive advantage of high mobility and the use of special self-reactivating sorbents for the regeneration of fluids.

Up to 90% of tar, asphaltenes, carbenes and carboids are removed from the used oil in the process of purification with mild effect on the oil’s additives.   Various solid particles and water are removed entirely with complete restoration of the oil to it’s original specification and color.

Complete GlobeCore plants may be used for the filtration and adsorption process of various types of oils, including hydraulic fluids and industrial oils.  The GlobeCore systems does not require readjustment for various oils.  They also do not require filter replacements since the regeneration and adsorption elements automatically reactivate themselves after each cycle of oil restoration/regeneration has been completed.

The uniqueness and affordability of the GlobeCore Process units makes them an excellent and cost effective investment for your company.

It’s time to get with the Process.  The GlobeCore Process!