Design Features
Customizable oil filtration trailers
Stationary use - near a transformer
Compact easily transported models for use in small spaces
Oil Regeneration Rigs (CMM-R)
Removal of acids and other products of oxidation. Improving of oil color along with oxidation stability and gas solubility. Reactivatable Adsorption Columns ranging from two (2) to thirty-two (32) in design with process cababilities up to 2,700 GPH (10,000 LPH)
Oil Degassing Rigs (UVM)
Removes dissolved gasses. Removes free, emulsified and dissolved water. Removes particulate matter down to 0.5 microns. Safe and rapid heating of transformer oil for processing and filling. Compact and easy to use. Units processing range from 260 to 4,000 gals per hour (1,000 to 15,000 liters per hour)
Oil Filtration Rigs (CMM)
Removal of water (free, emulsified and dissolved) and particulate matter from insulating, hydraulic, gear and lubricating oils. Units processing range from 160 to 2600 gals per hour (600 to 10 000 liters per hour)
Globecore Offers Oil Treatment Solutions
- Transformer oil
- Silicone oil
- Turbine oil
- Hydraulic oil
- Industrial oil
- Cable oil
- Other dielectric fluids
Primary Applications
Power transformers
Wind turbines
Circuit breakers
Tap changers
Complete Oil Regeneration
Acid number
Acidity reduction from 0.28 mg·KOH/g to 0.01 mg·KOH/g as per ASTM method D-664
Gas Levels
Gas Removal: From fully saturated with air (10 to 12% by volume) down to less than 0.1% by volume as per ASTM Method D-2945
Dielectric strength
Improvement in dielectric strength up to 75 kV
Oil color
Improvement of color from 5 to 0.5 units as per ASTM method D-1500 and DIN 51578, ISO 2049
More Than Just Equipment
Custom engineering solutions
Training seminars for your technical team
Start-up and unit commissioning
- Monday through Friday
- 8:00am - 7:00pm
- Bichurina Oksana
- e-mail: [email protected]
- skype : mg5globecore_de
- +493021788825
Error: No se encontró ningún formulario de contacto.